Metal wire thermometer
Running metal wire thermometer (RMT-01)
(0 Review)
The Takikawa RMT-01 is a specialized handheld Takikawa RMT-01 Cable Temperature Tester designed to measure the temperature of fast-moving metal wires with high speed and high accuracy using a K-type thermocouple rotating pulley
MKS : J-8521
Category : Metal wire thermometer
Tags : thermometer, temperature, takikawa
Running metal wire thermometer RMT-01

This thermometer uses a K-type thermocouple to measure the temperature of a moving metal wire quickly and with high accuracy.
Features of a running metal wire thermometer
Because temperature measurement is performed using thin wire K thermocouples, the heat capacity is small, and since power supply to the pulley and temperature data transfer are done non-contact, the rotational friction of the pulley is also very small, allowing for accurate measurement of the temperature of metal wires with a diameter of 0.1 mm or less.
Accurate calibration is possible with a K-type thermocouple thermometer calibrator.
It prevents short-circuit failures of thermocouples due to the adhesion of copper powder, and its compact, lightweight design and dry cell battery operation allow for installation in various locations.
specification
Model Name
RMT-01
Detection mode
K-type thermocouple
Measurement temperature range
10-250℃
display
7-segment LCD 4-digit
Number of views
1 time/second
power supply
4 AA batteries and AC adapter
Power consumption
6V-0.4A (dry cell battery) / 5V-0.5A (rechargeable battery)
(Reference) Battery life when using dry cell batteries: 4 hours
Temperature Calibrator RMR-01 (Made to Order)

This is a calibrator used to calibrate the RMT-01.
Calibration is performed by bringing the RMT-01's K-type thermocouple pulley into contact with a copper plate heater that allows for temperature setting, and then scanning it.
Calibration is performed under conditions close to actual operation, allowing for easy verification of the RMT-01's characteristics during operation.
The displayed temperature is verified using a dedicated thermometer that conforms to national standards.
specification
Model Name RMR-01 Compatible models RMT-01 Heater section Material cha plate thickness 0.5mm Set!! range 0-150℃ Heater temperature accuracy Set value ±3°C (at a set temperature of 100°C) Temperature variations inside the heater ±3℃ power supply AC100V Power consumption 200W (when heater is ON)